ICT~Intel DC Distr Pnel 12/24V Intelligent Distribution Panel with Remote Power Control is designed to be used in 12 or 24VDC applications. It features 12 fused output positions. Nine are ATO/ATC type fuses rated at up to 25 amps each, and three are JCASE type fuses rated at up to 40A each. Fuses and LED indicators are located on the front, enabling easy monitoring and replacement. The 1RU design saves valuable rack space, and fits all standard 19 inch racks. A front panel LCD information display and rear mounted Form C alarm contacts are provided. An integrated security protected Ethernet communications port allows the ICT180S-12IRC to be monitored from a remote site using an industry standard web browser. HTTPS and SNMP V1/V2c protocols are supported. System current, system voltage, individual output currents and fuse status can be monitored, and alarms can be sent to multiple email accounts. Five digital contacts inputs are provided to allow site monitoring sensors such as door, water, and smoke alarms to be connected and email alerts to be sent. Each alarm can be given a unique name. Configurable as normally open (NO) or normally closed (NC). DC outputs can be turned on and off remotely, allowing connected loads to be power-cycled using the Ethernet connection. Automatic load-shedding can be defined to protect critical loads. A network watchdog feature will ping up to two I.P. addresses and power-cycle loads such as routers which may need rebooting to restore communications with the site. 180 Amp Peak System Current 12 Fused Output Positions Front Mounted Fuses Fuse Status LEDs 1U 19 Inch Rackmount Heavy Duty Input Stud Connectors Remote Power Control Of Individual Outputs Automatic Load Shedding Five Digital Contact Inputs Form C Alarm Contacts 10/100BASE-T, IEEE 802.3 Compatible HTTPS And SNMP Protocols Firmware Upgradeable Over Ethernet Up To 30 Days Of Data-logging 3-Year Warranty