ICT~Intel DC Distr Panel Dual Dual Bus DC Distribution Panel with Remote Power Control is designed to be used in 12, 24 or 48VDC applications. Each bus features 6 output positions and supports hydraulic/magnetic breaker up to 25 amps per output each. Ships with blanking plates (breakers orderable separately). The 1RU design saves valuable rack space, and fits all standard 19 inch racks. A front panel LCD information display and rear mounted independent Form C alarm contacts are provided. An integrated security protected Ethernet communications port allows the ICT200DB-12IRC to be monitored from a remote site using an industry standard web browser. HTTPS and SNMP V1/V2c protocols are supported. System current, system voltage, individual output currents and breaker status can be monitored, and alarms can be sent to multiple email accounts. DC outputs can be turned on and off remotely, allowing connected loads to be power-cycled using the Ethernet connection. Automatic load-shedding can be defined to protect critical loads. A network watchdog feature will ping up to two IP addresses and power-cycle loads such as routers which may need rebooting to restore communications with the site. Five digital contact inputs are provided to allow site monitoring sensors such as door, water, and smoke alarms to be connected and email alerts to be sent. Each alarm can be given a unique name. Configurable as normally open (NO) or normally closed (NC). Operating Voltage 10.0 - 60.0 VDC Panel Capacity (Continuous) 160.0 Amps Panel Capacity (Peak) 200.0 Amps Bus Capacity (Continuous) 80.0 Amps Bus Capacity (Peak) 100.0 Amps Number of Outputs 12 Total (6 Per Bus) Breaker Rating (12/24VDC) 25A Maximum Breaker Rating (48VDC) 15A Maximum Hydraulic/Mag Breaker Rating 0 - 80VDC Site Sensor Contact Inputs 5 Digital (NO or NC) Alarm Contacts Form C (NO - C - NC) Operating Temperature -22°F to 140°F -30°C to 60°C Size (L x W x H) 9.3" x 19" x 1.72" Weight 7 lbs.